Skip to main content
Vicor 電源系統
航空航天與國防的可靠交鑰匙解決方案

A need for custom and standard, high-density power supplies

When a deadline is looming and you need to quickly and reliably design, prototype and deploy a custom power supply into your system, let Vicor Power Systems implement an efficient, power-dense and reliable solution. To meet today’s demanding customer requirements, Vicor Power Systems offers more than just custom design capability. Our engineers — who decades of MIL-STD qualification experience — will work closely with you during the full process from definition and design through manufacturing to ensure you get the most efficient and flexible power supply from source to point-of-load. We have a J-STD-001 and IPC-610 certified trainer on staff, and we are ITAR registered, NIST compliant and AS9100D certified. View our heritage applications and ISO 9001:2015 certificate

Designs for low and high voltage DC-DC, single and 3-phase AC-DC up to 800Hz

Designs for low and high voltage DC-DC, single and 3-phase AC-DC up to 800Hz

Our dedicated team of engineering and manufacturing professionals understand the aerospace and defense market and the types of electronic and electro/mechanical equipment used. They work with you to help solidify your requirements and to provide rapid concepts and prototypes that leverage Vicor high-performance modules for optimal systems capability. The team also consists of project managers who develop and monitor integrated project schedules and host design/manufacturing/test readiness reviews. This team understands unique, cutting-edge technology and is able to utilize the full resource of Vicor manufacturing, process and design engineering. Vicor power system engineers low voltage and ultra-high-power DC-DC power systems and single and 3-phase AC-DC up to 880Hz. Solutions maximize efficiency and cost-effectiveness, and they reduce time to market for both custom and standard power systems that are tested to meet MIL-STD704, 1275, 461, 810 and others.

A team dedicated to optimal system performance

A team dedicated to optimal system performance

Decades of experience

Experts at leveraging high performance Vicor modules

Experts at leveraging high performance Vicor modules

In house mechanical, electrical, and firmware design expertise

In house mechanical, electrical, and firmware design expertise

Meets air, sea, and ground MIL-STDs

Meets air, sea, and ground MIL-STDs

Benefits of working with Vicor Power Systems

Benefits of working with Vicor Power Systems

AS9100D certified, NIST compliant and ITAR registered

AS9100D certified, NIST compliant and ITAR registered

Rapid concept definition and prototyping

Rapid concept definition and prototyping

Systems from 1W to Megawatts

Systems from 1W to Megawatts

Rugged custom and industry standard VPX power systems

Rugged custom and industry standard VPX power systems

交鑰匙電源系統示例

國防驅動器

生死關頭需要可靠的電源解決方案來確保不會出現故障。電源迅速響應動態負載的功能在這些情況下至關重要。 

電源系統在各種電流下有 5 組分立式隔離 33VDC 輸出。它採用傳導散熱,可接受額定 50VDC 輸入。採用 62 平方英寸封裝,總輸出功率約爲 1200W,效率爲 86%。它的重量爲 3 磅。

Defense actuator

重要的移動通信

士兵們在戰場上需要能夠實時通信,不能受電源限制。能夠使用車輛電源或發電機,對於戰場環境而言,至關重要。  

该 AC-DC 转换器可为军用电台提供一组隔离式常开 24V 输出和一组可开关的隔离 24V 输出。这些电台必须能够使用战场发电机或战车电源运行,因此电源设计为能够接受这两种供电形式。AC 输入额定为 115/230VAC 60Hz,而 DC 输入则必须在 9-50VDC 范围内。总输出功率为 400W(最大值),重量约 5 磅,占位面积为 11.5 x 5.58 英寸。其工作温度范围为 -20 ~ 85ºC。

Mobile communications radios

地面自動駕駛車

爲野戰部隊自動運送補給,可確保將士安全。關鍵屬性是能夠在記住 SWaP-C 需求的同時,將現有車輛母線電壓降壓轉換爲傳感器電壓。

這種符合 MIL 標準的堅固器件可提供爲重要傳感器和單板計算機供電所需的母線電壓轉換功能。它可從符合 MIL-STD-1275E 標準的電源提供 21 組 12、24 和 54VDC 分立式輸出。總輸出功率爲 2.6kW。強制對流散熱允許器件在極其惡劣的環境中工作。

autonomous military supply vehicle

無人機電源

大型無人機需要大量電源來驅動所有板載電子器件。本電源由三相發電機提供,必須轉換爲較低的 DC 電壓。

這種符合 MIL-STD-704 標準的電源不僅可爲負載提供 28VDC 的 2kW 功率,而且還可提供 270VDC 的 200W 輸出。其重量爲 18 磅,尺寸爲 11.0 x 16.0 x 6.4 英寸。

Military stealth drone
Vicor custom power system examples image